LINOLIM adhesive for linoleum

Special adhesive for linoleum, carpet, cork and other floor coverings, as well as for bonding decorative surfaces to various types of substrates. Recommended for professional use.

FEATURES:

• The adhesive is ready for immediate use;
• Easy to apply;
• Good initial adhesion;
• Economical – low consumption;
• Resistant to pressure from wheelchairs;
• Suitable for heated floors.

INSTRUCTIONS FOR USE: The surface to be treated must be dry, free of dust and grease. The temperature of the material to be bonded must not be below +17 °C, and the floor temperature must not be below +12 °C. The adhesive is applied to the surface, left for 5 minutes, and then the material is glued on, pressing it for 10-20 minutes with a special roller for linoleum. The glued surface can be walked on immediately after gluing.

CONSUMPTION: approximately 1 l/3-5 m².

SETTING TIME: Final strength is achieved after 72 hours.

STORAGE: Store in the original packaging at a temperature above 0ºC for approximately – see label. Do not allow to freeze. Stir thoroughly before use.