ALUMINIUM paint
€2,91
In stock
Quick-drying aluminium paint for decorative finishing and protection of metal surfaces against corrosion, suitable for both interior and exterior use. High heat resistance up to +250 °C.
APPLICATION: Rusty surfaces must first be cleaned of rust; surfaces to be painted must be clean, dry and free of grease. Before use, the paint must be mixed in a separate container – aluminium powder must be added to the lacquer solution and mixed thoroughly. If necessary, the paint can be diluted with solvent No. 646 or acetone. These solvents are also used to clean tools. The paint is applied to the prepared surface with a brush, roller or spray gun.
DRYING TIME: 1 to 2 hours.
COVERAGE: 8-10 m²/l.
SAFETY PRECAUTIONS: Work in well-ventilated areas. Avoid direct contact with skin and eyes. If paint gets on your skin, remove it with a tissue and wash with warm water and soap.
Component I
Hazard categories: Flam. Liq.2
Skin. Irrit.2
Eye irrit.2
STOT SE2
STOT RE2
Repr.2
Signal word Danger
Contains: Acetone, n-butyl acetate, ethanol, ethyl acetate, toluene, isopropyl alcohol, nitrocellulose
Product exposure characteristics: H225-Highly flammable liquid and vapour.
H315-Causes skin irritation.
H319-Causes serious eye irritation.
H336-May cause drowsiness or dizziness.
H373-May cause damage to organs through prolonged or repeated exposure.
H361d-Suspected of damaging fertility or the unborn child.
Safety requirements: P102-Keep out of reach of children.
P210-Do not use in areas where there are high temperatures/sparks/open flames, hot surfaces. Do not smoke.
P260-Do not breathe dust/fumes/gas/smoke/vapour/spray.
P280-Wear protective gloves/protective clothing/eye protection/protective mask.
P314-If you feel unwell, seek medical advice.
P305+P351+P338-IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501-Dispose of contents/container in accordance with national regulations.
Additional labelling: EUH066- Repeated exposure may cause skin dryness or cracking.
2.3. Other hazards In accordance with Regulation 1907/2006, no substance has been assessed as PBT or vPvB.
In accordance with Regulation 2017/2100 or Regulation 2018/605, no substance has known endocrine disrupting properties.
Component II
2.1. Classification of the mixture
Hazard categories: Water-react. 2
Flam. sol. 1
Signal word Danger
Contains: Aluminium powder; CAS No.: 7429-90-5
Product exposure characteristics: H261-Contact with water liberates flammable gas.
H228-Flammable solid.
Safety requirements: P210-Keep away from heat, sparks, open flames and hot surfaces. No smoking.
P223-Do not allow contact with water due to a particularly strong reaction and possible explosion hazard.
P280-Wear protective gloves, protective clothing, protective goggles, protective masks.
P402+404-Store in a dry place. Store in a closed container.
P501-Dispose of contents/container in accordance with national regulations.
Additional labelling: P101- If medical advice is needed, the relevant information is provided on the packaging or label.
2.3. Other hazards In accordance with Regulation 1907/2006, no substance has been assessed as PBT or vPvB.
In accordance with Regulation 2017/2100 or Regulation 2018/605, no substance has known endocrine-disrupting properties.
