FINISH fine-grained filler
Fine-grained white polymer filler is designed for plaster, concrete, aerated concrete, brick walls and ceilings before painting. It sands well and produces a perfectly smooth surface. Suitable for interior use. Recommended for professional use.
PROPERTIES:
- Ready for immediate use;
- Contains substances that prevent the appearance of mould and mildew;
- Levelling the surface well, easy to sand;
- Suitable for painting surfaces with various types of paint;
- Dries in 2-3 hours;
- Can be stored for a long time in a sealed container;
- Economical — low consumption per 1 m².
INSTRUCTIONS FOR USE: The surface to be treated must be solid, dry and clean. To level large depressions, apply several layers of filler, allowing the intermediate layers to dry. The thickness of a single layer should not exceed 2 mm. After drying, sand with fine sandpaper.
SETTING TIME: At 20ºC, it hardens in 1 hour. Once dry, sand with fine sandpaper.
STORAGE: Store in the original packaging at a temperature of 20ºC for approximately – see label. Do not allow to freeze. Stir thoroughly before use.
Hazard categories: Skin sens. 1
Signal word: Warning
Contains: 2-chloroacetamide
Product exposure characteristics: H317-May cause an allergic skin reaction
Safety instructions: P261- Avoid breathing dust/fume/gas/mist/vapours/spray.
P280 – Wear protective gloves, protective clothing, eye protection and protective mask;
Additional labelling: P102- Keep out of reach of children.
