STATERM LEAK INDICATOR additive for indicating coolant leaks CONCENTRATE

The additive is designed to detect leaks in heating, air conditioning and water supply systems.

The additive contains special substances that help locate the leak. To detect a leak after adding STATERM LEAK INDICATOR, it must be thoroughly mixed with the coolant in the heating or air conditioning system or with the water in the water supply system. The pipes must then be illuminated with ultraviolet light, and the leak will stand out clearly. The leak can also be identified by the drying of the coolant.

After completing the work, the water supply system must be thoroughly flushed.

Any UV lamp or lamp can be used as a source of UV light. Timely repair of leaks will ensure stable and uninterrupted operation of the heating, air conditioning or water supply system.

STATERM LEAK INDICATOR mixes well with heat transfer fluids based on ethylene glycol (MEG), propylene glycol (MPG), isopropanol (alcohol) and water.

COMPOSITION: monopropylene glycol, special additives, complexing agent, specially prepared water.

PROPERTIES:

• Facilitates the search for leaks in heating, air conditioning or water supply systems;
• Gives the coolant luminous properties in ultraviolet light;
• Does not affect the rubber elements of the system;
• Does not cause corrosion;
• Mixes well with ethylene glycol (MEG), propylene glycol (MPG), isopropanol (alcohol) or water-based coolants.

TERMS OF USE: The additive is added to the heating, air conditioning or water supply system and thoroughly mixed with the coolant or water. Mixing ratio: 1 litre of the complex is designed for 100 litres of coolant. If necessary, the concentration of the additive can be increased to 2 litres per 100 litres of coolant.

STORAGE: Store in a tightly closed container at a temperature above 5°C in a dry, well-ventilated area.