RESIN epoxy medium viscosity without HARDENER
Medium-viscosity composition of modified epoxy resins. Used as component No. 1 in a two-component system (component No. 1 – resin, component No. 2 – hardener) designed for bonding various materials – metal, glass, porcelain, wood, ceramics, etc.). Can be used to repair various mineral surfaces, including concrete and cement mixtures.
Medium-viscosity composition of modified epoxy resins. Used as component No. 1 in a two-component system (component No. 1 – resin, component No. 2 – hardener) designed for bonding various materials – metal, glass, porcelain, wood, ceramics, etc.). Can be used to repair various mineral surfaces, including concrete and cement mixtures.
PROPERTIES:
- Transparent;
- Does not contain organic solvents;
- Does not contain phthalates;
- High mechanical strength;
- Resistant to temperature and chemicals;
- Good adhesion.
APPLICATION: The surfaces to be treated must be clean, solid and slightly rough. The surface moisture content must not exceed 4%. Apply to concrete surfaces no earlier than 28 days after the concrete has been laid. Components No. 1 and No. 2 must be thoroughly mixed in a ratio of 1:0.07. Press the parts to be bonded tightly together, ensuring maximum contact between the surfaces to be bonded. The optimum adhesive layer thickness is 0.1 mm. Tools and equipment must be washed immediately after use with an acetone-based solvent.
CURING TIME: Initial setting time is 30 to 60 minutes at room temperature. Full setting time is approximately 24 hours at room temperature.
STORAGE: Store in the original packaging at a temperature between +5°C and +25°C. The shelf life is indicated on the packaging.
Hazard categories: Skin Irrit. 2
Skin. Sens. 1
Eye Irrit. 2
Aquatic Chronic 2
Signal word: Warning
Contains: 4,4′-isopropylidenediphenol, oligomer reaction product with 1-chloro-2,3-epoxypropane (average molecular weight ≤ 700), oxirane, mono[(C12-14-alkyloxy)methyl] derivatives, benzyl alcohol
Product exposure characteristics: H315 – causes skin irritation
H317 – may cause an allergic skin reaction
H319 – causes serious eye irritation
H332 – harmful if inhaled
H411 – toxic to aquatic life with long-lasting effects.
Safety requirements: P262 – Avoid contact with eyes, skin or clothing.
P273 – Avoid release to the environment.
P280 – Wear protective gloves/protective clothing/eye protection/protective mask.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Additional labelling: –
