EPOMET liquid metal
Two-component adhesive – putty especially suitable for levelling metal and other surfaces (wood, ceramics, plastics (except PE), glass, concrete), gluing objects and parts. It has particularly good adhesion to metal surfaces, is metallic, silvery-grey in colour, and is easy to level and sand.
Two-component adhesive – putty especially suitable for levelling metal and other surfaces (wood, ceramics, plastics (except PE), glass, concrete), gluing objects and parts. It has particularly good adhesion to metal surfaces, is metallic, silvery-grey in colour, and is easy to level and sand. The adhesive – filler consists of component A – base mass and component B – hardener, which are mixed in the proportions specified for mixing.
USE: the surfaces to be treated must be clean and dry. Metal surfaces must not be oily – they must be degreased with acetone. Before coating metal, it is advisable to treat the surface with sandpaper. Mix components A and B thoroughly. After mixing the components, the adhesive – putty must be used within 5-8 minutes. Apply the adhesive putty and smooth it with a spatula. The adhesive putty hardens within 15-30 minutes, but reaches its maximum hardness after 24 hours. Hardened putty can be sanded and painted.
SAFETY MEASURES: work in well-ventilated areas. Avoid direct contact of the adhesive – filler with skin and eyes. If the adhesive – filler gets on the skin, remove it with a tissue and wash with soap and water.
Component A – base mass
Signal word: Dangerous
Contains: Reaction product: A-(epichlorohydrin) bisphenol, epoxy resin (with an average molecular weight of less than 700); Bisphenol F (epichlorohydrin), epoxy resin; hexanediol diglycidyl ether
Hazard categories: Eye irritation Cat. 2
Skin irritation Cat. 2
Skin sensitisation Cat. 1
Water hazard, chronic, Cat. 2.
Product exposure characteristics: H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.
H411-Toxic to aquatic life with long-lasting effects.
Safety requirements: P202-Do not use until all labels have been read and understood.
P280-Wear protective gloves/protective clothing/eye protection/face protection.
P301+P330+P331-IF SWALLOWED: rinse mouth. DO NOT induce vomiting.
P302+P352-IF ON SKIN: wash with plenty of soap and water.
P305+P351+P338-IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308+P313-If exposed or concerned: Get medical advice/attention.
Additional labelling: EUH205-Contains epoxy constituents. May produce an allergic reaction.
Component B – Base mass
Signal word: Dangerous
Contains: 1,3-benzodimethanamine, n-(2-cyanoethyl)-derivatives; 4-tetra-butylphenol; 1,3-benzenedimethylamine; methylhexane-1,6-diamine
Hazard categories: Skin corrosion 1B cat.
Skin sensitisation Cat. 1.
Acute toxicity Cat. 4.
STOT SE3.
Hazardous to the aquatic environment, chronic Cat. 3.
Characteristics of the product’s effects: H314-Causes severe skin burns and eye damage.
H302-Harmful if swallowed.
H332-Harmful if inhaled.
H317-May cause allergic skin reaction.
H335-May cause respiratory irritation.
H412-Harmful to aquatic life with long lasting effects.
Safety requirements: P101-If medical advice is needed, the relevant information is provided on the packaging or label.
P102-Keep out of reach of children.
P103-Read label before use.
P260-Do not breathe dust/fumes/gas/smoke/vapour/spray.
P310-Immediately call a POISON CENTRE or doctor.
P303+361+353-IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+P351+P338-IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310-Immediately call a POISON CENTRE or doctor/physician.
P405-Store in a closed container.
Additional labelling: –
