HARDENER epoxy transparent
An optically clear, low-viscosity liquid. Intended for use as a hardener with STAFOR liquid epoxy resins (component No. 2).
An optically transparent liquid with low viscosity. Intended for use as a hardener with STAFOR liquid epoxy resins (component No. 2).
Mixing ratios (by weight):
- STAFOR liquid resins (component No. 1): 100
- Clear hardener (component No. 2): 23
Application: Both components must be thoroughly mixed; it is advisable to then transfer the mixture to another container and mix again. The mixture can be used for at least 30 minutes (at 20°C). Curing time: 24 hours (at 20°C). Full cure time: 7 days (at 20°C).
Application restrictions: Minimum mixture and air temperature: 15 °C. Maximum mixture and air temperature: 30 °C.
Tools: Wash all tools and equipment with acetone immediately after use.
Safety: Wash hands and skin with warm water and soap.
Hazard categories: Acute tox.4
Skin corr.1B
Eye dam.1
Skin sens.1
Aquatic chron.3
Signal word: Danger
Contains: Isophorone diamine (3-aminomethyl-3,5,5-trimethylcyclohexylamine), benzyl alcohol
Product exposure characteristics: H302 – Harmful if swallowed;
H312 – Harmful in contact with skin;
H314 – Causes severe skin burns and eye damage;
H317 – May cause an allergic skin reaction;
H318 – Causes serious eye damage;
H412 — Harmful to aquatic life with long-lasting effects.
Safety instructions: P280 — Wear protective gloves, protective clothing, eye protection and face protection;
P301+P330+P331 – IF SWALLOWED: rinse mouth. Do not induce vomiting.
P303+P361+P353 – IF ON SKIN (or hair): Immediately remove all contaminated clothing. Rinse skin with water/in a shower.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing;
P310 – Immediately call a POISON CENTRE or doctor.
P501 – Dispose of contents/container in accordance with local regulations.
Additional labelling: –
