CORRECTOR for epoxy resin
An epoxy resin collector is an indispensable tool for producing flawless epoxy resin products. It effectively removes air bubbles from the surface of the epoxy resin before it has set and smooths it out. The finished product takes on a distinct sheen.
Epoxy resin corrector is an indispensable aid for producing flawless epoxy resin products. It effectively removes air bubbles from the surface of uncured epoxy resin and smooths it out. The finished product takes on a distinct sheen.
APPLICATION: Spray the corrector onto the surface of the uncured epoxy coating from a distance of 15–20 cm. It is recommended to apply the corrector within 10–20 minutes of applying the final coat. Spray the entire surface of the product.
STORAGE: In the original packaging at a temperature between +5°C and +25°C. The shelf life is indicated on the packaging.
Hazard categories: Flammable liquids, Category 2.
Eye irritation, Category 2.
STOT SE3
Signal word: Danger
Contains: Ethanol, isopropanol
Product exposure characteristics: H225 – Highly flammable liquid and vapour.
H319 – Causes serious eye irritation.
H336 – May cause drowsiness or dizziness.
EUHO66 – Repeated exposure may cause skin dryness or cracking.
Safety instructions: P210 – Do not use near sources of heat, sparks, open flames or hot surfaces. No smoking.
P261 – Avoid inhaling vapours or aerosol.
P305 + P351 + P338 – IF IN EYES: Rinse thoroughly with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501 – Dispose of packaging with other household waste.
Additional labelling: P102 – Keep out of reach of children.
