EPOTEP epoxy filler
Two-component epoxy filler is designed for levelling various surfaces made of metal, ceramics, plastic (except PE), concrete, wood, for filling cracks, joints and seams, as well as for bonding various materials. The adhesive has high mechanical strength, good adhesion and chemical resistance in aggressive environments. The adhesive consists of component A – the base mass and component B – the hardener, which are mixed in specified proportions.
Two-component epoxy filler is designed for levelling various surfaces made of metal, ceramics, plastic (except PE), concrete, wood, for filling cracks, joints and seams, as well as for bonding various materials. The filler has high mechanical strength, good adhesion and chemical resistance in aggressive environments. The filler consists of component A – the base mass and component B – the hardener, which are mixed in specified proportions.
APPLICATION: The surfaces to be treated must be clean, dry and free of grease. If necessary, the surfaces should be cleaned with alcohol or acetone. Particularly smooth and shiny surfaces should be treated with sandpaper before coating until they become matt. Components A and B are thoroughly mixed in a ratio of A:B = 10:1 (by weight). After mixing the components, the adhesive must be used within 15 minutes, otherwise the unused adhesive will harden. The adhesive is applied with a spatula and smoothed with a spatula dipped in soapy water. The mastic hardens within 2-4 hours, depending on the temperature; at low temperatures, the mastic hardens more slowly. The mastic reaches its maximum hardness after 24 hours. Hardened mastic can be processed – sanded, painted.
SAFETY PRECAUTIONS: Work in well-ventilated areas. Avoid direct contact with skin and eyes. If the mastic comes into contact with skin, remove it with a tissue and wash with warm water and soap.
Component A:
Signal word: Danger
Contains: Reaction product: A-(epichlorohydrin) bisphenol, epoxy resin (with an average molecular weight of less than 700); bisphenol F (epichlorohydrin), epoxy resin; hexanediol diglycidyl ether
Hazard categories: Eye irritation Category 2.
Skin irritation Category 2.
Skin sensitisation Category 1.
Hazardous to the aquatic environment, chronic Category 2.
Product exposure characteristics: H315-Irritating to skin.
H317-May cause an allergic skin reaction.
H319-Causes serious eye irritation.
H411-Toxic to aquatic life with long lasting effects.
Safety requirement symbols: P202-Do not use until all labels have been read and understood.
P280-Wear protective gloves/protective clothing/eye protection/protective mask.
P301+P330+P331-IF SWALLOWED: rinse mouth. DO NOT induce vomiting.
P302+P352 – IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308+P313-If on skin or if contact occurs: Get medical advice/attention.
Additional labelling: EUH205-Contains epoxy components. May produce an allergic reaction.
Component B:
Signal word: Danger
Contains: 1,3-benzenedimethanamine, n-(2-cyanoethyl)-derivatives; 4-tetra-butylphenol; 1,3-benzene dimethylamine; methylhexane-1,6-diamine
Hazard categories: Skin irritation Cat. 1B.
Skin sensitisation Cat. 1.
Acute toxicity Cat. 4.
STOT SE3.
Hazardous to the aquatic environment, chronic Cat. 3.
Product exposure characteristics: H314-Causes severe skin burns and eye damage.
H302-Harmful if swallowed.
H332-Harmful if inhaled.
H317-May cause an allergic skin reaction.
H335 – May cause respiratory irritation.
H412 – Harmful to aquatic life with long-lasting effects.
Safety requirement symbols: P101 – If medical advice is needed, the relevant information is provided on the packaging or label.
P102-Keep out of reach of children.
P103-Read label before use.
P260-Do not breathe dust/fumes/gas/smoke/vapour/spray.
P310-Immediately call a POISON CENTRE or doctor.
P303+361+353-IF ON SKIN (or hair): Take off all contaminated clothing. Rinse skin with water/shower.
P305+P351+P338-IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310-Immediately call a POISON CENTRE or doctor/physician.
P405-Store locked up.
