HEAT-RESISTANT primer
The primer is designed to strengthen loose and crumbling surfaces of stoves, fireplaces, chimneys and other surfaces exposed to high temperatures before filling, plastering or tiling.
FEATURES:
- Ready to use;
- Easy to use;
- High heat resistance up to 350°C;
- Low consumption.
APPLICATION: Before treating the surface with primer, it must be thoroughly cleaned of old paint, varnish, plaster, dust and easily flaking surface fragments. The primer is applied with a roller, brush or sprayer. Treat highly absorbent surfaces with primer again. If necessary, the primer can be diluted with water up to 10% of the total volume.
COVERAGE: Approximately 1 litre/5-10 m² depending on the absorbency of the surface.
DRYING: Initial setting time 30-60 minutes. Complete drying within 5-10 hours, depending on the absorbency of the surface, ambient temperature and number of coats applied.
STORAGE: Store in the original packaging at a temperature above 0ºC for approximately – see label. Do not allow to freeze. Stir thoroughly before use.
Hazard categories: Skin irritation 2
Eye irritation 2
Signal word: Warning
Contains: Sodium orthosilicate
Product exposure characteristics: H315 – Causes skin irritation;
H319 – Causes serious eye irritation
Safety requirements: P262 – Avoid contact with eyes, skin or clothing
P280 – Wear protective gloves, protective clothing, eye protection and face protection
P332+P313 – If skin irritation occurs, seek medical advice.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501 – Dispose of contents/container in accordance with local regulations.
Additional labelling: P102 – Keep out of reach of children.
