LOG END sealing treatment
A strengthening primer for treating log ends. Reduces moisture absorption and strengthens the wood structure. Minimises damage caused by wood-boring insects.
A strengthening primer for treating log ends. Reduces moisture absorption and strengthens the wood structure. Minimises damage caused by wood-boring insects.
Application: Log ends must be dry and clean. Apply the primer with a wide brush. Highly absorbent surfaces must be treated a second time using the ‘wet-on-wet’ method. The primer must be fully absorbed without forming a film on the wood surface. After treatment, the surface must retain residual absorbency for subsequent painting.
Coverage: on average 1 litre per 10–15 m².
Drying: Full drying time is 10–12 hours, depending on the ambient temperature and the number of coats applied.
Storage: Store in the original packaging at a temperature above 0 °C for approx. — see label. Do not allow to freeze. Stir thoroughly before use.
Hazard categories: Skin irritation 2;
Eye irritation 2;
Signal word: Warning;
Contains: Sodium orthosilicate;
Product hazard statement: H315 — Causes skin irritation;
H319 — Causes serious eye irritation;
Precautionary statements: P262 – Avoid contact with eyes, skin or clothing;
P280 – Wear protective gloves, protective clothing, eye and face protection;
P332+P313 – If skin irritation occurs, seek medical advice;
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing;
P501 – Dispose of contents/container in accordance with local regulations.
Additional labelling: P102 – Keep out of reach of children.
Permissible limit for GOS content in the product in the EU – subgroup A/i, ŪB; 140 g/l
GOS content in the product: 0 g/l
