PUTULIM adhesive for foam plastic

Special adhesive for bonding expanded polystyrene insulation and decorative panels.

PROPERTIES:

• Ready to use;
• Good adhesion to wood, concrete and plaster;
• Does not contain organic solvents;
• Does not dissolve polystyrene foam;
• Does not deteriorate during long-term storage in sealed containers;
• Low consumption per 1 m².

INSTRUCTIONS FOR USE: Stir the adhesive before use. The surface to be treated must be clean and free of grease. Apply the adhesive to both surfaces with a roller, smooth with a trowel and allow to dry for approximately 5 minutes. Then carefully place the tile in the desired location and press down. Work should be carried out at a temperature of at least +10 °C. Wash tools with water.

CONSUMPTION: approximately 1 litre/6-8 m².

SETTING TIME: approximately 3 hours. Depending on the thickness of the applied layer.

STORAGE: Store in the original packaging at a temperature of 20ºC for approximately – see label. Do not allow to freeze. Stir thoroughly before use.