RESIN epoxy liquid without HARDENER
A composition of modified epoxy resins with low viscosity. Used as component No. 1 in a two-component system (component No. 1 – resin, component No. 2 – hardener) designed for bonding various materials – concrete, natural stone, ceramics, etc.). It is also used as a two-component filling compound for industrial and decorative coatings, floors, fixing fibreglass, veneer, etc.
A composition of modified epoxy resins with low viscosity. Used as component No. 1 in a two-component system (component No. 1 – resin, component No. 2 – hardener) designed for bonding various materials – concrete, natural stone, ceramics, etc.). Also used as a two-component filling compound for industrial and decorative coatings, floors, fixing fibreglass, veneer, etc.
PROPERTIES:
- Transparent;
- Good adhesion to various surfaces;
- Does not contain organic solvents;
- No characteristic odour;
- Short curing time;
- High mechanical strength;
- Resistant to chemical reagents.
APPLICATION: The surfaces to be treated must be clean, solid and slightly rough. Surface moisture content must not exceed 10%. Apply to concrete surfaces no earlier than 28 days after concrete placement. Minimum application temperature +15°C. Components No. 1 and No. 2 must be thoroughly mixed in a ratio of 1:0.07. Tools and equipment must be washed immediately after use with an acetone-based solvent.
DRYING TIME: Initial setting time is 30 to 60 minutes at room temperature. Full curing time is approximately 24 hours at room temperature.
STORAGE: Store in the original packaging at a temperature between +5°C and +25°C. The shelf life is indicated on the packaging.
Hazard categories: Skin Irrit. 1
Skin. Sens. 1
Eye Irrit. 2
Aquatic Chronic 2
Signal word: Warning
Contains: 4,4′-isopropylidenediphenol, oligomer reaction product with 1-chloro-2,3-epoxypropane (average molecular weight ≤ 700), oxirane, mono[(C12-14-alkyloxy)methyl] derivatives, benzyl alcohol
Product exposure characteristics: H315 – causes skin irritation
H317 – may cause an allergic skin reaction
H319 – causes serious eye irritation
H332 – harmful if inhaled
H411 – toxic to aquatic life with long-lasting effects.
Safety requirements: P262 – Avoid contact with eyes, skin or clothing.
P273 – Avoid release to the environment.
P280 – Wear protective gloves/protective clothing/eye protection/protective mask.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Additional labelling: –
