SPLITTER for epoxy resin
This release agent for epoxy resins is a mixture of wax, mineral oils and natural oils. It is used to create a non-stick coating on moulds intended for use with epoxy resins, silicone, polymer clay and plaster.
This release agent for epoxy resins is a mixture of wax, mineral oils and natural oils. It is used to create a non-stick coating on moulds intended for epoxy resins, silicone, polymer clay and plaster.
APPLICATION: Spray the release agent from a distance of 20–30 cm onto a dry and clean surface. Apply 1–2 coats, allowing 2 minutes’ drying time between coats.
STORAGE: Store in the original packaging at a temperature between +5°C and +25°C. The expiry date is indicated on the packaging.
Hazard categories: Asp. Tox 1
Signal word: Danger
Contains: Hydrocarbons
Product exposure characteristics: H304 — May be fatal if swallowed or enters the respiratory tract.
Safety instructions: P301+P310 – IF SWALLOWED: Immediately call a POISON CENTRE or doctor.
P331 — DO NOT induce vomiting.
P332+P313 — If skin irritation occurs: seek medical advice.
P501 — Dispose of contents/container at a collection point for hazardous or special waste in accordance with local, regional, national and/or international regulations
Supplementary labelling: EUH066 – Repeated exposure may cause skin dryness or cracking
